Discovery II Rear Bumper with light guards
Discovery II Rear Bumper with light guards. Came off a 2003 Discovery, this bumper will fit all Discovery II models.
$300.00 + shipping
Contact pdesanctisiii@gmail.com
I stripped my rotor screw. I drilled it and it still won't come out. I even tried using a screw extractor and that snapped. I have been using a manual impact driver on the other rotors but it isn't working at all. Should I just put everything back together and take it to the shop? I really...
I'm in need of an impact wrench. I will be using it for working off bolts and screws (like the screw holding on the rotor on the DII). Should I just get a 1/2" impact wrench and a 1/2" to 1/4" hex adapter, like this http://www.toolbarn.com/dewalt-dw2298.html
Also, I don't want an air powered...
I have had this leak for a while now. I am still under warranty and the dealer keeps saying it is the oil pan seal. They have changed this seal twice and it is still leaking.
What could cause this leak? Rear main seal?
Thanks.
I had my oil pan gasket changed under warranty a couple weeks ago and while I was degreasing/washing the underside of my engine I noticed I am missing one access plug and the other is very loose and won't fit back in.
I see that the wheel in there spins when the engine is running. Did I cause...
Does anyone know the Valve Spring pressures of the Rover V8? Are they the same from the 3.9 to the 4.6?
Are they high like old muscle car engines or are they more on the low end like the jeep 4.0?
Thanks.
They changed their website.. Apparently you can only check online to see if the store has the parts..
A couple weeks ago I was able to order parts.. wtf. Where do you guys order parts from now? I know about rockauto, anywhere else?
I just got done installing some rears spacers on my discovery. But, I had trouble with the passenger spring getting back in with the spacer so I disconnected the brake line from the caliper and I lost about 3/4 or so of a cup of fluid.
Do I just re-attach the brake line and top off the...
I shipped my stock front bumper via greyhound. Boxed the ends with cardboard and wrapped the whole bumper with a ton of bubble wrap and taped it all up very tightly.
The buyer just emailed me saying the bumper was cracked and showed pics..
Anyone else have the problem of greyhound damaging the...
I just got done taking off my front output housing on my tcase to replace it with a housing that has a CDL http://toddcosuspensions.com/diiilodi.html
My question is what kind of liquid seal do I use between the Front housing and the main housing?
Also, I read in the RAVE I need to apply...
I was picking up a bumper I'm selling in the garage where I keep it. This is what I found.
It is for sale for around $9000. New paint job. Very clean, no rust. Manual 3 speed. That is about all I know.
It was dark and this was the best pic I could get with my cell, I'm going back tomorrow to...
I was cleaning my intake hose because I used to use a K&N filter, there was some dirt inside the walls of the hose. I noticed that the IACV hose(the smaller L shaped hose that connects to the intake hose) is very dirty inside.
I read the description of the IACV on the RAVE, but still a little...
I'm trying to change the bearing of my idler pulley (70mm). But I can't get that damn clip out! Are there any tricks or special tools used to get that clip out? Btw, it is not a circlip.
I found one at the local adoption facility. Her name is Shelly. Under two years old and Really nice. I can put my hand in her mouth and grab her jaw and she eats food out of my hand. I'm going back tomorrow to lay her on her back and see if she is calm. Another good thing is that she is only 90...
I have extended warranty and my engine was leaking a good amount of oil Dealer changed some gaskets/seals. Now my engine continues to leak a good amount of oil. It never used to leak oil. Maybe a drop here and there but not small puddles under my disco. I have been using royal purple 15w40 for...
Mr. Chapman and I quote "what the fuck were you thinking here? Equipe? Holy fucking rat turd, Batman. The bumper is a shit stick. I like Justin, and I hope his business does well....but fuck is that one shitty bumper.
What is the point of this bumper, anyway? I don't get it. It's not very...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.