Hey guys,
Iv been learking on Dweb for just over a year. About 14 months ago I bought my first Rover. I picked up mildly modified and cleanish 95 SWB RRC. Below is a photo of when I bought the truck and a mod list.
OME Shocks
3" Springs
Equipe Trailing Arms
Radius Arms
Equipe Steering Stabilizer
HD Upgraded Steering/panhard
ARB Bumper
X9 Winch Synthetic Line
Stainless Brake Lines
Borla Exhaust
New 285/75/16 (33"s) Mud Rovers
LT230
Disco Conversion Drive Shafts
Most people would be good to go with that set up. I had big plans when I bought the truck. About 2 weeks into driving it I noticed every hose was leaking and my alternator took a dump on me. So I did what anyone would do.... tare the whole truck down and I started my build. Here is a link to catch you up to date. http://www.pirate4x4.com/forum/land-rover/1082676-95-classic-build.html I figured Im at a good point to start a build thread on here. Basically I built my own armor, painted my truck, replaced some of the rear floor, I made my H1 wheels, made all the carbon fiber parts, lots a mechanical work, made my own exhaust, etc... Im a big "Do it yourselfer". The truck hasn't left my shop. As of a week ago were mobile and Iv been putting around town. Below are a few current photos of where Im at. Im by no means done.
Glamor Shots:
There is an old Hummer dealer about 2 miles from my house that has been closed down for a few years. They have a test course out back and ran up there to take a few poser shots.
Poser Shots:
Im pretty close to moving to "Phase 2" of my build. Ill be building some axels very soon. Ill also be collecting suspension parts. The plan is to coil-over the front. Link the rear with 5" springs. Nothing is set in stone as of yet.
Iv been learking on Dweb for just over a year. About 14 months ago I bought my first Rover. I picked up mildly modified and cleanish 95 SWB RRC. Below is a photo of when I bought the truck and a mod list.
OME Shocks
3" Springs
Equipe Trailing Arms
Radius Arms
Equipe Steering Stabilizer
HD Upgraded Steering/panhard
ARB Bumper
X9 Winch Synthetic Line
Stainless Brake Lines
Borla Exhaust
New 285/75/16 (33"s) Mud Rovers
LT230
Disco Conversion Drive Shafts
Most people would be good to go with that set up. I had big plans when I bought the truck. About 2 weeks into driving it I noticed every hose was leaking and my alternator took a dump on me. So I did what anyone would do.... tare the whole truck down and I started my build. Here is a link to catch you up to date. http://www.pirate4x4.com/forum/land-rover/1082676-95-classic-build.html I figured Im at a good point to start a build thread on here. Basically I built my own armor, painted my truck, replaced some of the rear floor, I made my H1 wheels, made all the carbon fiber parts, lots a mechanical work, made my own exhaust, etc... Im a big "Do it yourselfer". The truck hasn't left my shop. As of a week ago were mobile and Iv been putting around town. Below are a few current photos of where Im at. Im by no means done.
Glamor Shots:
There is an old Hummer dealer about 2 miles from my house that has been closed down for a few years. They have a test course out back and ran up there to take a few poser shots.
Poser Shots:
Im pretty close to moving to "Phase 2" of my build. Ill be building some axels very soon. Ill also be collecting suspension parts. The plan is to coil-over the front. Link the rear with 5" springs. Nothing is set in stone as of yet.
Last edited: