d1Driver - I have thought about it but the only way I can see to do heims on both ends would be to bend up a brand new rod instead of using the stock one. There is not much room before the bend around the diff cover to weld a heim like I do on the other end. If I had a tube bender I would definitely try making one from a brand new piece of heavy tubing with joints (heims or otherwise) on both ends.
Jake - Sounds good man! Its looking like I will be doing another batch starting at the end of May (as soon as school ends). I'll let you know!
ArmyRover - Thanks!!!!
muger80 - I was looking at those too. The heims look very similar but they say that with the high-misalignment spacers they are 2" wide and the mounting bracket for the panhard at the frame side is 1.75" so I don't know if those will work. I like how they sell them as a kit though with everything you would need. I may send them a note just to confirm the width, the price is a bit more but it may be worth it since I would just be paying for shipping once. This is what I am thinking (just so you all know what you would be purchasing). I will be using High-misalignment spacers from
Ballistic Fabrication and the heims, tube adapters and jamb nuts from
Barnes 4wd