I see I'm not the only dumass who broke their composite pulley trying to remove it with the wrong style puller. :bigok:
Truggy Build
- Thread starter mightymg
- Start date
OK more updates.. Almost done..
Sunday i got all wheel bearing re packed, and new seals.
I decided to run wheel spacers in the front and not the back to give me a better turn radius so i pulled the rears.
I got the winch line all spooled through my new fairlead..
Both doors are cut and lightened.
All the fenders have had there final trim ,and plastic moldings installed..
Beadlocks are mounted and the truck is on its own weight and at its final ride height..
Rear heimed tie rod is installed, and knuckles have been drilled out..
Then, last night i got the water pump in, the ps finished and bolted up, the new belt sized and fitted.
Power steering lines plumbed. all thats left is the ram mounts ( which will be later once i get an extra box to tap).
Flush and fill the radiator, change the oil, re wire the e locker, fill the front axle housing, install the fan.
Bleed the PS system, remount the tranny cooler, wire the hellas, and that should be about it. for now!....
Sunday i got all wheel bearing re packed, and new seals.
I decided to run wheel spacers in the front and not the back to give me a better turn radius so i pulled the rears.
I got the winch line all spooled through my new fairlead..
Both doors are cut and lightened.
All the fenders have had there final trim ,and plastic moldings installed..
Beadlocks are mounted and the truck is on its own weight and at its final ride height..
Rear heimed tie rod is installed, and knuckles have been drilled out..
Then, last night i got the water pump in, the ps finished and bolted up, the new belt sized and fitted.
Power steering lines plumbed. all thats left is the ram mounts ( which will be later once i get an extra box to tap).
Flush and fill the radiator, change the oil, re wire the e locker, fill the front axle housing, install the fan.
Bleed the PS system, remount the tranny cooler, wire the hellas, and that should be about it. for now!....
Attachments
You really need to dump that kmart camera and get something a little better. My iphone takes better pics than that thing. Otherwise it's looking good. Some nice finishing touches.
Steve Rupp said:
HAHA quit hating my POS!!! my wife has a nice one, and i also have a HD camcorder i just bought that takes good pic too, but i dont want to ruin them in the garage....
I keep looking at those pics and still am surprised with the quality that came out of lane's chopshop. well done again.
OK finally got the tranny cooler relocated, the driveshafts all bolted on, my heimed rear arm in my 3 link spaced upa 1/2 inch higher, and i got my hood pics on.. No shes pretty much ready to go..
All i really have left to do is some wire clean up, shim the PS pump for a little more pressure, and finish welding the sliders, and capping them. the ni need to install my poly skids, and my alluminum sheet for the top.. then i should be prety mcuh finito! YEAH! here are some pics of it outside of my garage....
All i really have left to do is some wire clean up, shim the PS pump for a little more pressure, and finish welding the sliders, and capping them. the ni need to install my poly skids, and my alluminum sheet for the top.. then i should be prety mcuh finito! YEAH! here are some pics of it outside of my garage....
Attachments
Last edited:
Hey Lane you didn't make it out to the LRNR last year... What happened? What have you done to the truggy lately....
