looking for a set of 1 or 2 inch spacers for my D2. got a set of 33 BFG ATs and I think they would look better and not rub if I could up my lift from 2" to 3"+. Cheap is good. Thanks.
WTB spacers
- Thread starter quick128
- Start date
MGRover1 said:
yeah I know...I'm hoping someone has some around that they have taken off, never used, or can make some that I could get a little cheaper.
I've got some 2" front spacers, and rear 3" RTE medium duty springs. Both are new (springs have like 200 miles on them).
Not sure the combination is what you are looking for, but it's what I have.
$175 + shipping.
Not sure the combination is what you are looking for, but it's what I have.
$175 + shipping.
nrene said:
Thanks, but I think I just want 1 inch spacers. I've already got 2" RTE springs on the truck just looking for that little extra so my new tires will fit better.
make your own. you have a drill? for the fronts either weld on new shocks mounts or cut the middle out to allow the shock to pass through.
http://www.onlinemetals.com/merchant.cfm?pid=1105&step=4&showunits=inches&id=195&top_cat=60
scroll down and you can get it cut to whatever length you want.
http://www.onlinemetals.com/merchant.cfm?pid=1105&step=4&showunits=inches&id=195&top_cat=60
scroll down and you can get it cut to whatever length you want.
I made my own from online metals, I used a drill press and a hole saw for the front spacers, super easy, just make sure you keep the saw cool. I think it only cost $30. look in the tech section for a full write up
