Rovertracks High Clerance Tie Rod

Jake1996D1

Well-known member
Mar 28, 2011
3,363
1
West Des Moines IA
I know these things are old news to most of you but since I have got rid of the track rod guard on the 3-link I figured I'd give it a shot. I gained like 3" of ground clerance by getting rid of the the track rod anchor.

262353_4282107648929_453009858_n.jpg


can be had here http://rovingtracks.com/products/steering.html
 

fishEH

Well-known member
Jan 26, 2009
6,930
203
Lake Villa, IL
Jake1996D1 said:
Do the rockware rods retain the stock clamp type connection instead of the jam nut? I think it was Chapman who posted one up a long time ago
I'm pretty sure their rods taper down to stock diameter and use the stock clamps at the ends. This is a reason I've never even considered their rods to be honest.
 

Jimmy

Well-known member
Apr 10, 2006
743
64
Aurora, CO
Jake1996D1 said:
Do the rockware rods retain the stock clamp type connection instead of the jam nut? I think it was Chapman who posted one up a long time ago

Yes. I run one. Never had a problem with it. It's beefy where it needs to be for most setups.