Removing ABS Modulator

[Steve Rupp]

I'd like to remove the ABS modulator from my truck and it looks like I need a pressure reducing valve from a non ABS truck and then tee the rear lines. What have you guys been doing to get rid of this thing? I can't for the life of me find that pressure reducing valve. Can you use the original and tee the front like the rear is?

 

[nosivad_bor]

steve, can you plumb in bigger diameter line that would have the same effect?

Billb is the guy you need to talk to about this.

 

[post]

just remove the plug from the extra port on the prop valve and use a tee and it'll work out.

http://www.lrrforums.com/attachment.php?attachmentid=6999&d=1193709133

 

[lunchbox]

If you search for posts under my name, you should find a pic of my set up. Works great with D90 calipers and rotors with the 35s. I just ran the lines straight from the MC to the prop valve. The fronts tee at the prop valve. Then I just ran a tee right off prop valve for the rears. I can post pics when I get home if you don't find any.

Chad

 

[Steve Rupp]

Thanks Chad, I had a feeling that would be ok.