Q&D QD's

[Velocewest]

A trip to the hardware store, about $20 and an hour later, and I've got quick disconnects for the front anti-roll bar.

Parts:

Two each -- 5/8" clevis pins, 5/8 i.d. washers, 3/4 x 1" brass flange (5/8 i.d.), 3/4 x 1 1/8" brass sleeve (5/8 i.d.), 3/16 ring lock pins. Reuse the 3/4" i.d. washers from the link mount bolts.

I would have just bought longer 3/4" brass flanges, but the store didn't have any longer than 1" so I just used the sleeves. The clevis pin holes are 1/8", I drilled out one hole to fit my ring lock pins.

 

[Velocewest]

After I did all this it occured to me that I could have just bought the ring lock pins and drilled the existing bolts. :banghead:

I am officially flaming myself for not thinking. I wasted enough money to buy a six pack of good beer. :smilelol:

 

[Nomar]

Still, looks like a nice job. I really need to do this one day...