C
Craigness
Guest
My 96 disco runs like crap after it warms up. Robison told me (Almost swore to me) that it was skicking exhaust valves and told me to get a valve job. Well, I got a valve job done and $1200 later the truck is still doing the same thing.
The motor stumbles and runs erratic after about 20 minutes of driving from a cold start. The check engine light is on and the codes are P1313 and P1316 and some others are P0300, P0303 and P0305 (Engine missfire on multiple, cylinder 3 and cylinder 5). I'm running out of money and time. The engine runs rough but at red lights to check engine light will blink and when it does the motor runs good. When the blinking stops, it acts up again.
There is no arcing from the wires. The fuel pressure is fine.
Any idea?
The motor stumbles and runs erratic after about 20 minutes of driving from a cold start. The check engine light is on and the codes are P1313 and P1316 and some others are P0300, P0303 and P0305 (Engine missfire on multiple, cylinder 3 and cylinder 5). I'm running out of money and time. The engine runs rough but at red lights to check engine light will blink and when it does the motor runs good. When the blinking stops, it acts up again.
There is no arcing from the wires. The fuel pressure is fine.
Any idea?