Differences between D1 and RRC front axle?

[Velocewest]

What are the differences between the front axle housing on a '95 D1 and a '92 RRC? I know the 3rd and axles are 24 spline vs. 10... Is this a direct swap?

Off the top of my head I can't think of anything significant, which is another way of saying, I must be forgetting something...

 

[roverover]

If you switch the 3rd and axel/cv setup drive flanges etc it will direct swap If you are changing the axel housing certain years of RR don't have the sway bar mounts they have the twin brake lines and vented rotors so you would need to use your RR stuff I'm not a RR guy but I did put a complete front axel off a RR on My D1 and these were the issues I encountered

 

[Velocewest]

See, I knew I was forgetting something! I do have the vented brakes on my RRC. If the axles are compatible then I will just swap the 3rd and the axles. Ultimately less work than removing the entire unit anyway.

Thanks man!