Bumper question??

[offrovn]

Can anyone tell me who makes this bumper and if it will fit on a 95 D1??

Had trouble resizing the pix, should be good now............hopefully!

 

[1MITCH1]

Fail

 

[NikeCheck246]

Great Divide Edition and probably not. It will mount to the frame holes but I don't know if the wrap-around will work - have at it. Came factory on GDE Range Rover Classics.

 

[offrovn]

Great Divide Edition and probably not. It will mount to the frame holes but I don't know if the wrap-around will work - have at it. Came factory on GDE Range Rover Classics.

Well that is what the owner said it was but I was a bit suspect given its in on a 88 RRC, didn't think that was the correct year for that edition? Anyway I offered her a $100 for it but if it won't fit whats the sense. She is parting that truck out or selling it whole for $800 if anyone wants the contact info?

 

[rover4x4]

it was built for Range Rover Classics and belongs on Range Rover Classics.

 

[NikeCheck246]

i think it will bolt up to an 88 Classic also

 

[p m]

It is a non-winch Great Divide Edition aluminum bumper for a Classic, and it does fit a Disco 1 - even better than Classic:

http://3rj.org/AnotherFiveDays/img036.jpg

and you could stuff a winch inside if you wanted to:

http://3rj.org/Colorado2010/106_0109s.jpg

Buy this bumper, you will not be disappointed.

 

[JustAddMtns]

It is a non-winch Great Divide Edition aluminum bumper for a Classic, and it does fit a Disco 1 - even better than Classic:

http://3rj.org/AnotherFiveDays/img036.jpg

and you could stuff a winch inside if you wanted to:

http://3rj.org/Colorado2010/106_0109s.jpg

Buy this bumper, you will not be disappointed.

I'm with Peter on this one.

 

[ronswin]

I know for sure it will fit a 96 Disco as I have one on my truck. All aluminum, well built and a steal for $100. You may have to mod the bolt holes a bit but it indeed fits and looks damn nice!

Ron S.
1996 D1

 

[whatroad]

offrovn, is this truck in Lincolnville?

 

[offrovn]

Rockland I think, talking with the owner this afternoon, will let you know. It was on craigslist a while back.

 

[offrovn]

whatroad you were right, it is in Lincolnville :banghead:

 

[jeffro0502]

I know for sure it will fit a 96 Disco as I have one on my truck. All aluminum, well built and a steal for $100. You may have to mod the bolt holes a bit but it indeed fits and looks damn nice!

Ron S.
1996 D1

x2, I took the one of my great divide RR when it got smashed in the back and used it on my 94D1, took some adjusting to the mouthing points but was not a hard thing to do.