Search results

Wife's 2011 RR Sport. Went out to find a large leak coming from under the crossmember. Large enough that it had spread beyond the car's footprint. Looked like water but when I touched it it was clear oil. Transmission fluid. Took it to the (not LR specific) shop immediately and they are stumped...

Anyone have any experience with these? http://www.roverparts.com/Parts/L319SRK-OME

Disco owners know what a PITA it is to try to find a sport rack system (Yakima, Thule, etc.) that will work with the Disco roof. Yakima makes the HiRise towers that add 3.5" to the 1A mounts but thats still too low for Discos. I machined a set of 5" spacers out of aluminum to work with my 1A...

Former WeRock Pro Mod Comp buggy. 102" wheelbase 2940 lbs 4 link w/ 7075 lowers Rear spooled D60: Ford 9? Big Bearing outer brgs/seals Front welded D60: Knuckles are from ?91 Dodge Power Wagon unit brg bored out for u-joints. Spindles are Ford Super Duty. Axles built by Buddy Carlson of...

15" gives far more tire choices. Very little use. No rock rash. 3.75"BS Mount your Swampers on these and keep your ATs for daily use. SOLD

'97 D1 with an honest 83,000 miles. It was originally a Trec Challenge truck. I bought it from the orig dealership in Atlanta that still had it. (I have the orig paperwork) Oil changed/tires rotated religiously at 3000 miles. Obviously, it has the best that RockStar Fab has to offer: -RSF front...

'97 Disco Looking for a vacuum leak(s). I'm assuming the Rave CD has a vacuum line diagram but I have no idea where it is. I've gone page to page in engine, fuel system, emissions, even cruise control. Anyone know where to find this info?

I have an intermittent overheating problem. Every so often (getting more often) it'll overheat. Occasionally, when I shut it off, I'll get coolant pouring out of the overflow tube. If I start the engine, the overflowing stops. I'm figuring that I'm probably losing enough coolant that eventually...

'89 RRC: -Window glass with frames. -Grey seats, not perfect but in surprisingly good shape. -Grey inner door panels and a console hatch. All good shape. Will ship for Pacifico. Will hold for 2 weeks and then toss.

delete

Got a set of Hella jumbo FF320s and they have H7 bulbs. H7s have just two identical posts. How do you tell pos from neg?

They are rusty and look like crap but they're still very solid. The rust hasn't cut into the metal to any real extent. Hey, get them sand blasted and powdercoated and you'll have a decent pair of sliders on the cheap. I took them off a D2 but I see no reason they wouldn't fit a D1 also. One...

This is the last of the full coverage rear bumpers I have. (They've been discontinued) They require virtually no trimming to install. It's brand new, powder coated, and never mounted. I'll include a set of used (but perfect shape) LED taillights. $400

RockStar Fabrication is offering a 5% discount and the opportunity for free shipping to Leadville at this year's LRNR. The order must be placed in time to be finished before the rally. Approximate cutoff is July 10. This discount applies to all RSF products, however, powder coating is not...

Both speakers have been replaced w/ shielded subwoofers. The amp is epoxied to the rear of the shielding. Couple small cracks in the bottom of the surround have been epoxied for a strong fix. Sounds better than new. $30

Considering one (either 6K or 9K) for my 3000lb buggy. Good specs, light weight (55 lbs) Always been a Warn guy. Just wondering if they hold up?

Perfect condition $100

Apparently, different year D2s had different bumper tailights. Some have the backup lights, some have amber lights, etc. Please post what year you have and what lights are in your bumper. Also, what is the red light hooked to? My wife's '03 has the backup light and a red light. The red one has...

OK, It's time to clear out some stuff. I've got some front & rear bumpers and a roof rack for sale. These are all in excellent condition but were basically prototypes or demos. Some are pre-production pieces that may not be dead-on perfect or have been updated with design changes. Examples would...

A little banged up (It's a skid plate for God's sake :D) but the mounts are straight. BTW, that's dried up Georgia mud, not rust $150