Search results

I have front and rear GBR 3.90 gear kits that are not going to be used. These are similar to the GBR 4.11, but offer a 9% gearing reduction versus 12%. The fronts are reverse cut for strength plus these should be a little stronger than the 4.11. The rear pinion gear works with both the 4-bolt...

Selling a bunch of driveline parts that I have no use for: Truetrac (24 spline, rear, brand new in box, new style with 6 bolts vs 3) new timken bearings included $450 shipped -SOLD GBR reverse cut front, 3.90 ratio ring and pinion set, new in box with shims, nuts, etc. $650 shipped LR 24...

In the process of rebuilding my front Disco II drive-shaft, I didn't make note of how deep to seat the new centering ball socket into the bore. Anyone know if the ball/socket is supposed to be pressed all the way to the seat in the yoke? There is a lip at the top of the ball's socket that...

For sale: OME Medium Duty spring kit for Discovery IIs (front and rear springs). The fronts are 777 LH and RH. The rears are 781 LH and RH. These are new in the original box from Atlantic British. The 781s are 290 lbs/in I believe and fairly long. These will give a little more lift in the...

Looking for a passenger side front bumper corner in Silver with accessory light opening. Other colors okay, or both sides in black non-painted? Also may be interested in front bumper center plastic cover (black). -Thanks

Need to sell: GBR 4.11 HD reverse cut front and rear gear kits, brand new in box from GBR (November 2013) including seals, pinion nuts, and all needed shims. $645 shipped Also have: HD LR 4-pinion differential carrier - super strong open diff (P38 4.6 diff machined to work correctly for all...

Need to sell new, front and rear gear kits from GBR in original box. These include the heavy duty reverse cut front gears. All shims, pinon nuts and diff seals included. The gears are for D-90, RRC, DI and II. $620 shipped. Also have: -two cleaned and painted (gloss black) diff housings ready...

Selling a brand new, rear Truetrac that is still in the original bag. This is brand new, purchased in the last year and not old stock. $400 shipped $440 shipped w/ new Timken bearings Thanks, Dave

Land Rover 4-pinion open differential carrier w/ new Timken bearings for sale. This is an excellent differential out of the rear of a 4.6 RR. It was machined to work 100% properly in D1, D90 and RRC differentials. Tthe ring gear mounting flange diameter was cut down 1/2", the webbing was...

Selling the Rover so no need for this kit I put together to rebuild my oil cooler lines (engine and transmission). I decided to go this route versus buying new lines for longevity and price. The kit uses your existing cooler line steel pipe and replaces the hose sections with 1/2" hydraulic...

Selling my 98' Discovery LSE with newly built 4.6. 161k miles in Oxford blue. The truck has spent its entire life in CA until the last 6 months and as a result has no rust. The 4.6 was built by Ellsworth machine shop- balanced crankshaft assembly, new 229 Crower cam, new lifters, new cam...

Selling some parts I've been saving for a build that's not going to happen. Brand new rear Truetrac (bought 2013), still in bag) with new carrier Timken bearings. $450 shipped Land Rover HD 4-pinion open differential from a P38 and machined to fit all Discovery, Defender 90, and RRC...

- double post please delete -

Nice pair of front and rear Truetracs. Original owner said they have 4000 miles on them. I will include the carrier bearings (each race kept with the roller bearing it's mated to). $800 shipped for the set, or $400 shipped a piece

96' 5-speed Discovery SD Vehicle was bought to restore or use for the 5-speed parts but I'm not going to get around to it. It is a willow green SD without sunroofs and a tan cloth interior. 117k miles. The 5-speed transmission and transfer case are flawless. I had a 96' with less miles and...

96' 5-speed for parts - willow green 96' 5-speed Discovery SD Vehicle was bought to restore or use for the 5-speed parts but I'm not going to get around to it. It is willow green and an SD with no sunroofs and cloth interior. 117k miles. The 5-speed transmission and transfer case are...

Wondering if the Disco II steering box will fit a Disco I without modification and using Disco I hoses? Anyone know? How about the steering shaft, same part?

Looking for a rear 24 spline Truetrac (front would be okay). Thanks

I have an original 18" Michelin XPC on a Hurricane alloy which was the spare of a 2001 P38. The tire looks new but may have been used very briefly. The wheel has no gouges but does have a 2x2" section where the paint has rubbed off. Looking to get rid of it. $45 plus shipping? Tire is in...

-both 24 spline front ABS CV joints with left and right half-shafts attached (bought as spares, look great but I never used them) $55 shipped I would like to sell these random parts as a kit: -four 1-0005 PDQ u-joints made in USA from Advance - these have the grease nipple in the cap. These...