Search results

what are you trading it in on?

sold sold

bump for a smokin deal.................love that unit

anyone? :yawn:

ANyone got a photo of the top end of a 3.9? Specifically the tops of the valves? Or a measurement from the top of the retainer to the tip of the valve. Thanks.......:drool:

Has anyone here ever tried to install an aftermarket oil cooler in a D1? While installing my cam a few weeks back, I couldn't help to notice how small the OE one was. Summit Racing has some nice ones available for a decent price. It shouldn't be too hard to match up some fittings or get the...

Does anyone here have the stock cam specs for the OE cam in a 3.9? I want to see how worn the old cam that came out is ........ thanks :)

No time and the dealer offered extra for the rack and all. New truck is arriving in 3 weeks :)

bump before it gets traded in..................

FYI Folks, here is a nice restored Bronco that has NEVER been in salt. This guy will swap for a Rover if you are in the Market for a Bronco http://atlanta.craigslist.org/car/157789924.html This truck is nice, I have seen it in person.

still shopping this thing, huh?

Got a problem here on a 99 RR. The A/C system is fully charged with no leaks (not overcharged either). It will blow nice and cold and then quit after a little bit. If you bring up the RPM's (floor it from 0-40) the cold air will start coming out again for a few miles and then quit again. Any...

i think one of the TC bolts is loose. Something is rattling in there

thanks.......... How does one do that? Is it self expanatory?

Is the inspection cover on this thing the round opening with 3 7mm or 8mm bolts? 94 D1

I can tow with it, I have a trailer too. Code enforcement here in PTC, GA does nto allow my trailer to be in my yard here. If it is viewable, $250. I race Sportbikes and Motocross, so I need the ability to haul bikes. I just figured it'd bea easier to buy a pickup for that addiction.

Sorry, want to keep it whole. I have a few spare HID lights and misc. leftover motor parts if needed.

BUMP new Crower Cam, 4130 Pushrods, lifters, timing chain, rocker arm assemlies, valve springs, and head gaskets.

Well, here is what happened. I had the timing light on it and it had spark. So, I eliminated the lack of spark posibilty and assumed I had something not lined up correctly (wehn it was). So, I started mving things around (making them incorrect) trying to chace the not starting issue. When in...

There were two wires, one green, one black. They went into a 3 wire plug, that used the two outside holes. The black one had split. I am amazed that I noticed this. Apparently, it was very brittle and my removing it finished it off.