Search results

hey crown, thanks for asking - rack is still available, but unfortunately the DC pickup option is off the table for now. Also, would most likely require weekend pickup. Cutting asking price to $350 including cross bars & Hi-Lift (if wanted) Thanks, i believe you are indeed correct, but I am...

Thanks Stu, I'm not sure if the SD brackets would work, they seem to have a channel in them for the bar, whereas the KVT ones are flat. Otherwise they look pretty similar...

Putting my KVT backpack rack up for sale. AFAIK it’s a little different from the standard backpack rack with a 4” high basket, aluminum flooring, and the standard Hi-Lift mount. Rack was purchased from original owner in May 2006. It has sat in the back of the garage since Dec 2009. The rack...

Can anyone tell me if there is a discernible difference in the two shafts? I know they carry two different part #s, i assume the 4.6 ZF pushes the TC back a little bit... I need to pick up a new one for my 04, but most places list only 99-04. prob gonna go with Tom woods or...

what would you consider "fair" or a lowball?? hows the hood? got any pics?

how is your r380 holding up under the torque of the 2.8?

rpi has a good pic of the problem http://www.v8engines.com/ebaypictures/engines/2006_block_casting.jpg new Coscast block; http://cgi.ebay.co.uk/Cos-cast-V8-Engine-Land-Range-Rover-Discovery-4.0-4.6_W0QQitemZ150400637209QQcmdZViewItemQQimsxq20091228?IMSfp=TL091228162001r31762 some good pics on...

Theyre not, they have the 14CUX system which has its own reader under the passenger seat (which sounds great but the codes can be a bit vague ie; 44/45). there are more differences between 94/95 and 96-99 - If you buy a 94/95 odds are the TC input isn't cross-drilled, which isnt too big a...

i would be more concerned with rust and whether the radiator has been replaced/ cooling system maintained

http://www.amazon.com/Kats-22200-Watt-Battery-Thermal/dp/B000I8XD9E/ref=sr_1_1?ie=UTF8&s=automotive&qid=1260759580&sr=8-1 + a block heater?

05 range. my preference. last year of the bmw 4.4 too. bigger interior. mileage is a big factor.

http://www.discoweb.org/forums/showthread.php?t=55265 this thread should be more accessible

the cases are the same, the AT one has a soloniod on it IIRC that needs to be removed. i dont know how the mounts differ. What output shaft are you talking about? If you had sheared the splines btwn the TC and r380 you wouldnt be able to drive at all. If you sheared the splines on the rear...

Excellent, Thanks.

anyone know offhand what size those things are? not near the truck, nada on search...... gracias

These are the same manufacturers specs that called for ATF in the R380 and then changed years later. MTF94 is a marketing move born out of an agreement btwn LR and chevron IIRC. the specs for MTF94 can be viewed here; http://www.kewengineering.co.uk/Auto_oils/ROVER%20MTF.pdf i havent compared...

http://cgi.ebay.com/ebaymotors/EATON-ELOCKER-ELECTRONIC-LOCKER-24-SPLINE-LAND-ROVER_W0QQcmdZViewItemQQhashZitem4399d29197QQitemZ290343522711QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories are there any whispers of an elocker coming out? I don't really believe this.

what does the fluid in the MC reservoir look like. if i had to guess it would be the MC going. stay away from the allmakes brand ones if you replace it. they are shit. antichrist has posted a couple times about using vise grips to pinch the flex line and diagnose MC or Slave. I would...

just to amend this i believe its a 12mm x 1.25 thread, not 14mm like i stated above

My inane ability to strip/crossthread things continues, any words of advice on replacing the bung? I'm going to call around tomorrow to see how much $$ it would cost to just get a new one welded in.... im looking at reaming/retapping/helicoil-ing but my skill level in this specific area is...