Hey Guys...........I have a 2003 Disco II that when the wipers are OFF, the intermittent Wiper switch clicking sound is going off at whatever the last intermittent speed was at. The wipers do not move but just the clicking noise is present. Is this the switch/relay or what going bad?
Thanks
Jay
I have a 2003 Disco II.....I found the horn not working, found the fuse blown! Replaced the fuse, horn works now, but sounds weak. What's up with this and how can it be fixed?
Hey Guys........I know it's been gone over but I have a 03 D2 with 140k and between 65-70mph I am getting the Vibration - more through the seat than the steering. I changed ALL the front U joints and even had it balanced and I still have it, maybe even worse. Checked the tires/weights - All good...
Hello:
Does anyone have a good independant garage in the Northern NJ area? I refuse to go to the Stealership! I need to get my 3 amigos cleared.
Thanks
Jay
I had the same thing and what it more than likely is is the following: There is a arm inside the handle that has a star like end and it attached to the back of the lock and it breaks adn then your lock will spin. It is pretty common unfortunately. I just replaced the handle and took my old lock...
Ok, so my drivers door lock broke.....Well actually it is the part that connects to the back of it that has the phillips head looking attachment to it. Well, how do I get the Drivers door handle off? I have take the hex nut out and looked inside but just need some clarification before I do...
Hello:
I have a set of Hella aftermarket fog/driving lights mounted on the brush bar and they seem to come on for a short time then cut off. They are hooked up so that when the high beams come on & they are activated they will come on as well. Could the relay be bad as I have checked the switch...
I am looking fora Passenger side front fog light/driving light and the rear bumper lights for a 2000 Disco2...........
If anyone has any, please Email jslagg@optonline.net
Thank you
Jay
Hello:
I need to replace my drivers side mirror glass and know it can be done but I am not sure of the process. Can anyone help me out with the install?
Thanks
Jay
Has anyone ever placed a exhaust exiting on the side of their disco 2 at all not only for a unique look but to get a nice tone out from the auto? If so, did you have to make the exhaust yourself or is there a Co. that makes this type of exhaust?
Thanks!
Need Right Rear Blinker
If you seperate, I would be interested in the RT. rear bumper blinker...........Any interest in doing this and if so, how much?..........I can be reached at jslagg@optonline.net
Thank you
Jay
I am looking for the thin body (door dent ) molding ( complete set ) for a 2000 disco 2. It seems that even the dealers only have the thick ones. Does anyone know where to find the thin blk moldings?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.