Search results

Four Firestone Destination AT's 265 75R16 mounted on 3 LR rims and spare rim. Additional LR rim included. Tires have 1709 miles on them. Located in Atlanta area. Asking $600, but will consider best offer. Photo: http://www.adrive.com/public/WfcepC/tires.JPG

I've lost my 1999 disco 1 sd. I rolled her due to an antilock brake failure and would like to offer parts via the forum that helped me build her up. Send a PM if you're looking for a part and we'll see if we can work out a price or trade. I'd love to be able to give it all away, but not in this...

Have you checked the plugs, especially for cylinder 3. I doubt an oil change will improve a misfire situation, but you never know. I had a similar situation that was caused by an incredibly worn camshaft. Is/how long has the check engine light been on? Has your mileage dropped? There are...

I strongly recommend running new wires and bypassing the factory amps. You've just invested in a new headunit and going to use 14 year old wires through old amps? Running new wire is really easier than you may think. Take out the glove box, remove the pillars and loosen rear speaker mounts. To...

I took my D1 on LR's off-road course outside of Atlanta. It wasn't all that rigorous imho, but every single Freelander (all 3) got stuck or couldn't make it up a muddy hill. It was sad! One LR tech summed it up like this, "I'm ashamed they call it a Land Rover!" The owners were frustrated about...

My wife and I were invited to take our D1 on

My wife and I were invited to take our D1

Personally I'd rule out a broken clip before going further. I don't know of an electrical link between the turn signals and changing gears.

The two problems may be unrelated. Have you popped off the plastic cover of the shifter? There's a clip that can break or pop out. If that's the case, you can't shift.

My steering box was a leaking mix of ATF and pwr steering fluid... black and burnt. I've rebuilt several boxes before without issue, so bought a rebuild kit and a used one cheap. After completing the rebuild, on the used one, without issue (bearings, shaft, gears all looked great). Passes all...

After investigating, here's where I am. Bulbs were blown, no fuses tripped, battery was dead, so recharged. Disco starts right up and scanguage reads voltage output of 18.8V. Disconnected negative terminal and placed meter between negative terminal of battery and negative cable. Reads a voltage...

Driving home last night I went over a set of railroad tracks a bit too fast and immediately lost my headlights while the battery dummy light came on and my voltage sensor, via Scanguage, jumped up to 18.7V. I made it home using axillary lights. When I stopped to check it out the high beams work...

Can you manually adjust the idle down a bit or is the linkage loose? To the right of your actuator diaphram is the cable and it may be able to be adjusted. I'd drive it if it was a short distance.

Yesterday my disco was rearended (teen on cell phone...) and my bumper is trashed. Time for an upgrade:bigok: ! I've read a number of postings on rear bumpers, but thought I'd throw this out there and see what's working. I have an ARB front bumper, but would consider a TJM if they had side...

I'm with you on all that and had the hoses delivered today... goes on tomorrow AM. I love working on my truck and hated sending it in. This past year I had 3 discs fused in my neck and I'm just now getting back to being able to dig into it. The disc thing resulted from an 86 year old lady on a...

You want to cover the sunroof with a metal cover? :confused: I've never heard of one breaking... Just curious...

You want to cover the sunroof with a metal cover? :confused: I've never heard of one breaking... Just curious...

Somehow I dodged a bullet. Top hose and thermostat were replaced and all seems fine. I've put about 200 miles on since and no overheating or leaks. I too thought it'd be the headgasket. I'll never go to LR Gwinnett again. They replaced my top hose with a generic 'flex' hose, charged 1-1/2 hours...

OK... The shop just called and said they filled it up and no leaks, nothing. This makes no sense! My wife and friend are dumbfounded also. I asked the shop to test drive it and get it up to temp. I've never heard of anything so weird. I'm pretty sure my wife thinks I'm trying to hide the repair...

Thanks flyfisher11 for the info.