Search results

I've got a set of four "Stratos" 16x8 alloy wheels in good shape. These are intended as your off road set as the wheels have some scrapes and nicks. First $250 takes them, shipping is extra.:patriot: http://s6.photobucket.com/albums/y222/MelAIA/?action=view&current=P38WheelsandTires006.jpg

I have a set of four wheels from a P38 that have a few imperfections, but would be suitable for a trail rig. $250 plus shipping from 92780. Each wheel is approximately 26 lbs.

Looking to see if anyone is parting a RRC that has a coil conversion with low miles on it. Let me know if they are standard height or lift, OEM or OME, medium or heavy duty. :patriot:

I've got a spare valve block, but need the driver that's usually attached to the side of it. If you know of anyone who's changed out their P38 suspension to coils, then they may have one laying around.:D

After returning home after a trail run in my stock 92 RRC I noticed my turn signals weren't working. I stopped and noticed that the fuse was popped. I put in the spare and it popped as soon as I tested it. Then I tried the hazard switch to see if the signal relay would still work and it...

I'm hoping some of you P38 owners who have done the coil conversion are interested in liquidating your valve block and other components. Email with what you have at MelAIA@aol.com.:victory:

I have a used a/c condensor that fits a DII. Not sure if there's any difference among the model years as I mistakenly purchased it for my P38. Still wrapped. $50 plus shipping to a good home.:D

I've got a pair of Stratos wheels with General Grabber tires with serviceable tread for $100. These will fit a D II and P38 and are in decent shape. These are available for local pickup in SoCal, but I will ship at the buyer's expense. Perfect for spares or if you just need a solid pair for...

Did the search for removal of the viscous fan clutch so I could change out my waterpump. Came across some good advice and did most of the recommended suggestions for loosening the large nut on the end of the water pump. Added some penetrating oil to the stubborn union and whacked it with a...

Just recently my 2001 P38 has been experiencing phantom locking and unlocking while I've been driving. Initially I thought that the key fob battery was low, but it doesn't show up as a message on the dash. My next thought was that it was being caused by avionics since I drive by an airport...

Does anyone have experience with running 265/70/16 Mud Rovers on a P38? Somebody with a D II experienced no problems with Coopers in this size, but would like to hear from those running stockers with this brand/size. :D

I've got a dog guard and securing knobs, but I need the arms that mount inside the back that these attach to. Is there anyone that has these either from a parts truck or a pair sitting in their DD they don't want anymore? :confused:

On family off-road trips my '92 RRC is fully loaded with 4 people and extras on a Yakima load warrior rack. We might do four of these trips a year, six max. I can't decide which of the two spring models would be more comfortable for a daily driver without sacrificing load capacity and off-road...

I have a pair of fog lamps from a Discovery II. The passenger side has one upper tab broken, but I still have the part in case someone wants to glue it back on. The driver's side has only 1 tab left, so it's better for parts. Glass is good on both units with only minor pitting, no cracks or...

Has anyone modifed non-Genuine LR seat covers so that the airbags in the seat edges can still deploy? This is for a 2001 RR and I suspect that all the RR II's were equiped with these airbags. I'm assuming you could modify a set based off a set of Genuine seat covers by either opening up the...

Looking for a set of fans and condensor assembly for my 2001 4.6. If you're local I can come by and pick up. Thanks, Mel

They're the small black metal tabs that are glued to the upper tailgate glass that holds the third brake light lens assembly against the back window. I went to the dealer to try to locate a part number and none of their sheets show them. Maybe someone's got a rusty upper tailgate they've...

Recently my 92 RRC has been squealing around turns in forward, but binding in turns in reverse. In addition, it's been making a growling noise that sometimes sounds like the transmission is slipping very similar to loose matrix in the cats. Should I drop both driveshafts and have the shafts...