Recent content by Sharkman

No tips available. It can't be done on that model.

....tapered edge forward meaning toward the front of the vehicle correct? SVZ

I am replacing the oil pump gears on '04 DII. I reassembled and installed the front cover before noticing that the old gear set has a slight taper on the outer gear. Does anyone know if the gear should be installed with the tapered edge toward the engine front cover or toward the plate with the...

See above

-Truetrac LS -CDL -32s Steve

Kevin, I broke a rear at Tellico in May. Steve

Just for the heck of it...check the fuel pump fuse. Steve

Tim, If you can't figure it out we can take a look on Saturday....it may be the cable is out of position at the transmission. Steve

Hey Tim, Sounds like it might be the xyz (gear selector) switch gone bad....when you put the truck in 'R' does the dash indicator say 'R'? I replaced the switch on my DII a couple of weeks ago and the symptoms started with no Reverse. Steve

Saudi spec! Saudi spec with LR winch mount/basket Man...that looks good Bruno!!! and It's PRO!!! Steve

Jon, What pressure switch (on/off psi) are you planning to use with this setup?

Bleeder Plug LR changed the location of this plug sometime between 99 and 03. The 99s had it molded into the hose and tend to fail. The newer ones are located in the plastic T to the left of the radiator. Steve

Nwp I've had a NWP rack for over a year. No rust and built out of the same stock as SD. Both sunroofs are functional and it's been heavily loaded with pelicans, etc dozens of times.

Stock pump Hey Ross, I'm also running the MM10.5 with the stock D2 PS pump. Seems to have plently of pull but is pitifully slow!

Fuse loc Cigar lighter and EC interior rearview mirror both use Fuse #15 / 20amp located in the passanger compartment fusebox under the steering wheel.