Thanks for the answers... As far as continued testing I replaced the pump and started checking the cable from the pump forward and found the connector located in the rear fender well area. I moved it around and got the 13.1 volts I was expecting. I then ran the truck and was continuing my...
I was troubleshooting the fuel pump (Which was bad) and found the voltage at the connector on top of the tank was 2-3 volts lower than the battery voltage which makes me nervous. This voltage check was made with no connection to the pump so voltage drop should be 0. The PO had allready put a...
My 02 d2 dash was curling when I wrecked it last year. I don't think LR has had a good year for disco dashes. My 1996 d1 had the curl but I was able to fix it with the molding kit. This 1995 is a clean low mileage but has the worst dash I've ever seen.
Thanks for your response
Are you talking about a Range Rover classic??
are the dashes really the same size?
By the number of posts you have made I'm sure you are a lot more knowledgeable than I am. I'm always interested in new ideas and if the RR dash is the right size I'd be interested but I'm...
My dash is toast... Its pulled up at the front out at the radio, also at the glove box and fuse box door area. Ive been wondering about cutting off the cushion part and possibly laying coats of fiberglass over any holes etc. Has anyone thought about this or any other permanent fix other than...
Has anyone ever removed the dash pad and not replaced it but painted the metal... Mine is so bad I don't think the kit would do any good Particularly around the radio and glove box. I realize the amount of work necessary to change the dash so I was wondering if anyone had ever seen the metal...
I have to assume the valve was there at one time but I have no first hand knowledge.
I'm working off the premise Mason offered... Bad valve Primarily because the carpet is so clean on the back side. I see no sign of any leaks anywhere. Time will tell I just ordered a valve from Will.
hi everyone. I haven't posted in about 4 years but just got another discovery 1
It's a 1995 with 80 k on the clock that looks to be in pretty good shape overall.
Almost the first thing I noticed was the heat control valve is missing and the hose looped back at the engine connections so I assumed...
Will, I have a 1995 D1 and am needing a Heater core A beige dash top and instrument surround. Do you have any of this and can you give pricing including shipping to 70517
Thanks
Gordon Sitts
gsitts@cox.net
I guess the real reason I am going to persue this is I really don't like to have to wait for the other shoe to drop... I really believed I was doing everything I could to keep my disco healthy including very regularly personnally checking the drivelines for loosness,grease leaking etc. I never...
When I described the problem I assumed you would understand that I will replace the front drive line with a properly set up driveline which will include new u joints on both ends... I will not even try to use the old one since it has several large dents in it now. When I described my idea of...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.