Recent content by ashtrans

  1. A

    D2 Drivetrain tick/click

    Hi, Are you sure the flex plate isn't cracked ? Dave
  2. A

    94-95 vs 96-99 ZF 4HP22 differences

    Hi, Let me know the 2 box codes and I will advise any differences , It's the last 3 digits of the second number down on the ID plate, Dave
  3. A

    d2 torque converter issues

    This guy is correct, The transmission ecu will not allow the converter to lock until the engine is warm Dave
  4. A

    Center Diff Strength

    I think what he meant was you can still lock it manually, which is correct, you can,
  5. A

    Center Diff Strength

    From our web FAQ's: I have checked the adjustment but it won't come out of diff lock. This is often reported after recent off roading, the centre diff is there to allow the props to turn at different speeds when cornering to stop drivetrain wind up, the speed difference is quite small and the...
  6. A

    CDL not locking

    Try backing the cdl light switch out 1 or 2 turns, the switch plunger can stop the diff lock sepector fork sliding Dave
  7. A

    Changing out ZFHP22 Transmission - Output shaft (does not spin freely)does not spin

    Re: Changing out ZFHP22 Transmission - Output shaft (does not spin freely)does not spin Yes. Sorry I missed that, both are box code 747 which is late D1 and both would of had the long splined FTC5090 coupling shaft when they were built Dave
  8. A

    Changing out ZFHP22 Transmission - Output shaft (does not spin freely)does not spin

    Re: Changing out ZFHP22 Transmission - Output shaft (does not spin freely)does not spin all D2's have the longer splines on the coupling shaft, the fact that the new tranny had the short splines would suggest it's out of a D1 or range rover in which case will not work in a D2, whats the...
  9. A

    Front Auto Locker..?

    why are you anti air ? we have no problems with the air on our lockers as they don't leak, mainly as the design does not rely on a rotating air seal, Dave
  10. A

    Transfer case input gear

    it will be 38 tooth
  11. A

    Rebuild transmission

    do you mean you have no drive in reverse ? if so do you have 'R' displayed on the dash when reverse is selected ? Dave
  12. A

    Installing GBR front drive shaft 99 DII

    Hi, do the Tom woods and the GBR still use the stock 1310 UJ's ? or do they have bigger ones ?
  13. A

    Defender 30 TDI and Disco R380 bellhousing

    the 200 tdi defender LT77 is shorter than the 200 tdi disco, maybe this was what he was thinking of
  14. A

    Defender 30 TDI and Disco R380 bellhousing

    300 tdi disco bellhousings are the same as the 300 tdi defender bellhousings, if you are pulling a V8 out and putting a 300 tdi in you will have to change the pinion shaft and bellhousing for the 300 ones, Dave
  15. A

    New Ashcroft Air Locker

    we use 6mm throughout, a much more common size, our locker comes with all fittings and solenoid to fit the ARB compressors, Dave
See more
Top Bottom